Uplink frequency hopping (FHSS) + Spread Spectrum (DSSS) technology, high transmission stability, strong anti-jamming capability Ground terminal controller supports two simultaneous input Lu Yao, were used as aircraft control and PTZ control, the sky receives transmitted to the master via DBUS Ground terminal via remote control coach to get the remote control port data sent to the client through the sky uplink, downlink synchronization with the video link, without disturbing each other Downlink and uplink remote video link system while working at 2.4Ghz USB 2.0 Full HD video output: IOS, Android and other mobile phones, tablet PCs do monitor via USB connection using Multiple video input and output formats.Ground terminal with 14dbi directional antenna (optional), measured the effective transmission distance up to 5km (3.1mile) Ground terminal with 5dbi omni-directional antenna (standard), measured the effective transmission distance of 1.7km (1.05mile) ![]() Use 2.4G RF technology, transmitting power 100mw (CE and FCC certification) By the way, when you use the the ETH1, 7 (Green) will blink frequently.- Digital video transmission, input supports up to 1920 * 1080 60fps, output up to 1920 * 1080 30fps Light 1(Green), 2(Green), 3(Green), 4(Red), 6(blue) and 8(Red) will keep constant bright. Light 5 (Green) and 8(Red) will keep constant light.ģ) After the starting completed. When the device begin to normally start work, all indicators status is described as follow:ġ) After powering on, light 1,2,3 turn green, light 6 turns blue and light 8 turns red.Ģ) After 1 second, light 1(Green), 2(Green), 3(Green) and 6(Blue) start to blink. Indicator light 4(red) will blink frequently. (3) After the startup completed, indicator light 1(green), 2(green), 3(green), 5(green) and 6(blue) will keep constant bright. (2) After one second, indicator light 1(green), 2(green), 3(green) and 6(blue) will start to blink. (1) Indicator light 1, 2, 3 and 6 will turn on in green color. Then the indicators’ normal state will be as follows: ![]() The indicators will bright and the whole system starts work.Īfter powering on, the devices will boot normally. ![]() ![]() Aerial video production and cinematographyĪfter checking all the connections are in good condition, turn on the the IP Camera, PC, transmitter and receiver.Plug-and-Fly, out of the box setup and operation.Stability boost mode with 4/8Mhz channel bandwidth.SUNTOR ST20NPT is the Perfect tool for High end Drone and long range transmission application(20km), allowing a Zero delay with Mavlink gimbal controls and the ability to keep the live link in very noisy environments surrounded by other Drones and wireless communications. SUNTOR’s all-in-one features supports RC, Pixhawk and HD Video transmission into one link. The zero-latency transmission offers live, real-time imaging for broadcast, inspection, and mission critical applications. It’s 2.4GHz radio, 2×2 MIMO and software manual channel selection ensures resilient data connectivity, free from interference, specifically from UAV controls links. SUNTOR employs TDD-COFDM technology, widely regarded as the industry standard in the broadcast and cinematography markets for UAV. SUNTOR, delivers excellent HD image quality, zero latency, and the highest levels of robustness. Zero Latency HD Video Downlink and Data UplinkĪll professional UAV HD applications now share the same requirement – a robust wireless HD video downlink.
0 Comments
Leave a Reply. |